| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SPC563M60X bảng dữ liệu(PDF) 75 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SPC563M60X bảng dữ liệu(HTML) 75 Page - STMicroelectronics |
|
75 / 128 page ![]() DocID14642 Rev 12 75/128 SPC563M64x, SPC563M60x Electrical characteristics 127 4.6 Power Management Control (PMC) and Power On Reset (POR) electrical specifications Table 14. PMC Operating conditions and external regulators supply voltage ID Name C Parameter Min Typ Max Unit 1 Jtemp SR — Junction temperature –40 27 150 °C 2 Vddreg SR — PMC 5 V supply voltage VDDREG 4.75(1) 55.25 V 3Vdd SR — Core supply voltage 1.2 V VDD when external regulator is used without disabling the internal regulator (PMC unit turned on, LVI monitor active)(2) 1.26(3) 1.3 1.32 V 3a — SR — Core supply voltage 1.2 V VDD when external regulator is used with a disabled internal regulator (PMC unit turned-off, LVI monitor disabled) 1.14 1.2 1.32 V 4Ivdd SR — Voltage regulator core supply maximum DC output current(4) 400 — — mA 5 Vdd33 SR — Regulated 3.3 V supply voltage when external regulator is used without disabling the internal regulator (PMC unit turned-on, internal 3.3V regulator enabled, LVI monitor active)(5) 3.3 3.45 3.6 V 5a — SR — Regulated 3.3 V supply voltage when external regulator is used with a disabled internal regulator (PMC unit turned-off, LVI monitor disabled) 33.3 3.6 V 6— SR — Voltage regulator 3.3 V supply maximum required DC output current 80 — — mA 1. During start up operation the minimum required voltage to come out of reset state is 4.6 V. 2. An internal regulator controller can be used to regulate core supply. 3. The minimum supply required for the part to exit reset and enter in normal run mode is 1.28 V. 4. The on chip regulator can support a minimum of 400 ma although the worst case core current is 180 ma. 5. An internal regulator can be used to regulate 3.3 V supply. Table 15. PMC electrical characteristics ID Name C Parameter Min Typ Max Unit Notes 1Vbg CC C Nominal bandgap voltage reference —1.219 — V 1a — CC P Untrimmed bandgap reference voltage Vbg–7% Vbg Vbg+6% V 1b — CC P Trimmed bandgap reference voltage (5 V, 27 °C) Vbg–10mV Vbg Vbg+10mV V 1c — CC C Bandgap reference temperature variation — 100 — ppm /°C |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |