Voice Module SKU: DFR0534

Introduction

Do you always feel like the DIY work is boring, not attractive or no vitality when you design it by

yourself?

This new voice module produced by DFRobot can solve these problems. This module can store 8M

audio files, which means it can store more than 200 audios for your choice. Its storage method is as

simple as USB flash drive, and audios can be updated at any time. It uses the DF-Gravity interface,

free from wiring; It has the ability to play the specified audio, play in loop, and adjust volume. It is

suitable for all kinds of projects related to sound or voice, such as intelligent car, meteorological

stations, smart home devices, vehicle navigation, toll stations, safety monitoring, machine audio

navigation and so on.

Specification



Operating Voltage: 3.3V ~ 5V



Interface: UART



Support MP3 WAV Hardware Decoding



Support Sampling Rate (KHz): 8/11.025/12/16/22.05/24/32/44.1/48



Support to imitate SPIFLASH to U disk, and audios in SPIFLASH can be updated by the way to

operate USB flash drive



Support 30 levels of volume adjustment



Dimension: 22x30mm/0.87x1.18in