PIC16F570 datasheet(86/134 Pages) MICROCHIP

86 / 134 page

PIC16F527

DS40001652C-page 86

 2012-2014 Microchip Technology Inc.

VOH

Output High Voltage

D090

I/O ports/CLKOUT

VDD –

0.7

——

IOH = -3.0 mA, VDD = 4.5V, -40

C to

+85

C

D090A

VDD –

0.7

——

IOH = -2.5 mA, VDD = 4.5V, -40

C to

+125

C

D092

OSC2

VDD –

0.7

——

IOH = -1.3 mA, VDD = 4.5V, -40

C to

+85

C

D092A

VDD –

0.7

——

IOH = -1.0 mA, VDD = 4.5V, -40

C to

+125

C

TABLE 15-1:

DC CHARACTERISTICS: PIC16F527 (INDUSTRIAL, EXTENDED) (CONTINUED)

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise specified)

Operating temperature

-40°C

 TA  +85°C (industrial)

-40°C

 TA  +125°C (extended)

Param.

No.

Sym.

Characteristic

Min.

Typ.†

Max.

Units

Conditions

†

Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not

tested.

Note 1: In EXTRC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the

PIC16F527 be driven with external clock in RC mode.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent

normal operating conditions. Higher leakage current may be measured at different input voltages.

3: Negative current is defined as coming out of the pin.

4: This spec applies to all weak pull-up devices, including the weak pull-up found on MCLR.

PIC16F570 bảng dữ liệu(PDF) 86 Page - Microchip Technology

PIC16F570 bảng dữ liệu(HTML) 86 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL