DT Series Technical Manual

Deutsch DTHD Series

Deutsch developed the DTHD Series for those applications

requiring a complete, environmentally sealed, single power circuit

termination. The plug features an integral coupling latch that

provides tactile and audible feedback during coupling. The rugged

thermoplastic receptacle is designed as an inline for cable to cable

applications and is supplied with an integral Vee-Groove to accept

mounting, clips, brackets and flanges.

Deutsch DT Bussed Series

3

Integral Connector Latch

Rugged Thermoplastic Housing

-55o C to +125o C Operating Temperature

Available Configurations:

DTM/DT 2, 3, 4, 6, 8 & 12 - Size 20/16

DTP 2 & 4 - Size 12

DTHD 1 - Size 4, 8 & 12

Silicone Seals:

DTM: Accepts AWG 22 - 16 wire

DT: Accepts AWG 20 - 14 wire

DTP: Accepts AWG 14 - 10 wire

DTHD: Accepts AWG 14 - 6 wire

Crimp Contacts with Option of Gold or Nickel

Finish, Solid or Stamped Construction

Current rating all contacts @ 1250 C no derating

DTM - 7.5 Amps

DT - 13 Amps

DTP - 25 Amps

DTHD - 25 to 100 Amps

Fail-Safe Secondary Locks All (Except DTHD)

Hand Insertable/Removable Contacts

Budget Minded

Tactile and Audible Assembly Feedback

Field Proven Long Service Life

Engine Compartment Rated

Meets Most Harness Design Requirements

Superior Environmental Seal

Seals on .053” to .120 dia.(1.35mm to 3.05mm)

Seals on .053” to .145 dia.(1.35mm to 3.68 mm)

Seals on .097” to .170 dia.(2.46mm to 4.32mm)

Seals on .134 to .292 dia. (3.40mm to 7.42mm)

Low Costs, High Reliability Terminals for Data &

Signal Transmission

Meets Most Signal Requirements

Positive Contact Retention

No Special Tools Required (Except DTHD)

Low Installation Costs

Features

Benefits

Deutsch DTP Series

Deutsch’s DTP Series connectors are the answer to all of

your most demanding power application requirements.

DTP Series connectors offer the proven reliability and

quality of Deutsch’s DT Series, combined with the added

flexibilty of using power contacts.

Utilizing the Deutsch DT receptacle shell, Deutsch has

combined the rugged characteristics of the DT product

line with a bussing device allowing the elimination of

various harness splices. By using internal stamped bussed

contacts this product can be configured in whatever

arrangement meets your individual needs in the DT shell

size that matches your requirements. Complete bussing

flexibility in a compact, economical package.

A STEP AHEAD

DT Series Manual #50907.indd 3

7/31/2008 5:14:34 PM