ADBMS1818ASWZ-R7 datasheet(11/92 Pages) AD

11 / 92 page

Data Sheet

ADBMS1818

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. B | 11 of 92

Table 11.

Parameter

Rating

Total Supply Voltage, V+ to V–

112.5 V

Supply Voltage (Relative to C12), V+ to C12 50 V

Input Voltage (Relative to V–)

–0.3 V to +6 V

C18

–0.3 V to MIN ( V+ + 5.5 V, 112.5 V)

C(n), S(n)

–0.3 V to MIN (8 × n, 112.5 V)

IPA, IMA, IPB, and IMB

–0.3 V to VREG + 0.3 V, ≤ 6 V

DRIVE

–0.3 V to +7 V

All Other Pins

–0.3 V to +6 V

Voltage Between Inputs

C(n) to C(n–1) and S(n) to C(n–1)

–0.3 V to +8 V

C18 to C15, C15 to C12, C12 to C9, C9

to C6, C6 to C3, and C3 to C0

–0.3 V to +21 V

Current In and Out of Pins

All Pins Except VREG, IPA, IMA, IPB,

IMB, C(n), and S(n)

10 mA

IPA, IMA, IPB, and IMB

30 mA

Specified Junction Temperature Range

ADBMS1818ASWZ and ADBMSASWAZ –40°C to +85°C

ADBMS1818CSWAZ

–40°C to +125°C

Junction Temperature (TJMAX)

150°C

Storage Temperature Range

–65°C to +150°C

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Careful attention to PCB

thermal design is required.

θJA is the natural convection junction to ambient thermal resistance

measured in a one-cubic foot sealed enclosure. θJC is the junction

to case thermal resistance.

Table 12. Thermal Resistance

Package Type1

θJA2

θJC

Unit

05-08-1982

2.5

°C/W

SW-64-2

2.5

°C/W

1 The exposed pad must be connected to the V− plane for proper thermal

management.

2 Board layout impacts thermal characteristics such as θJA.

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD protected area only.

Human body model (HBM) per ANSI/ESDA/JEDEC JS-001.

Field induced charged device model (FICDM) and charged device

model (CDM) per ANSI/ESDA/JEDEC JS-002.

ESD Ratings for ADBMS1818

Table 13. ADBMS1818, 64-Lead LQFP_EP

ESD Model

Withstand Threshold (V)

Class

HBM

±1000

CDM

±750

C2b

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.

ADBMS1818ASWZ-R7 bảng dữ liệu(PDF) 11 Page - Analog Devices

ADBMS1818ASWZ-R7 bảng dữ liệu(HTML) 11 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

bảng dữ liệu tải về

Link URL