ISL71841SEH

FN8735 Rev. 8.00

Page 3 of 30

Aug 10, 2023

Ordering Information

SMD ORDERING

NUMBER

(Note 4)PART NUMBER

RADIATION HARDNESS

(Total Ionizing Dose)

PACKAGE DESCRIPTION

PKG.

DWG. #

TEMP

RANGE

5962R1522001VXC

ISL71841SEHVF (Note 2)

HDR to 100krad(Si),

LDR to 100krad(Si)

48 LD CQFP (RoHS Compliant)

R48.A

-55 to

+125°C

5962R1522001VYA

ISL71841SEHVL (Note 3)

44 LD CLCC

J44.A

5962R1522001V9A

ISL71841SEHVX (Note 5)

Die (RoHS Compliant)

N/A

N/A

ISL71841SEHF/PROTO (Notes 2, 6)

N/A

48 LD CQFP (RoHS Compliant)

R48.A

N/A

ISL71841SEHL/PROTO (Notes 3, 6)

44 LD CLCC

J44.A

N/A

ISL71841SEHX/SAMPLE (Notes 5, 6)

Die (RoHS Compliant)

N/A

N/A

ISL71841SEHEV1Z (Note 7)

Evaluation Board

NOTES:

2. These Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb

and Pb-free soldering operations.

3. These Hermetic Packaged products are intended for SnPb soldering and may be shipped with terminations precoated with SnPb solder compatible

with SnPb soldering operations only.

4. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed must be

used when ordering.

5. Die product tested at TA = + 25°C. The wafer probe test includes functional and parametric testing sufficient to make the die capable of meeting the

electrical performance outlined in “Electrical Specifications (±15V)” and “Electrical Specifications (±12V)”.

6. The /PROTO and /SAMPLE are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. These parts are intended for

engineering evaluation purposes only. The /PROTO parts meet the electrical limits and conditions across temperature specified in the DLA SMD and

are in the same form and fit as the qualified device. The /SAMPLE parts are capable of meeting the electrical limits and conditions specified in the

DLA SMD. The /SAMPLE parts do not receive 100% screening across temperature to the DLA SMD electrical limits. These part types do not come

with a Certificate of Conformance because they are not DLA qualified devices.

7. Evaluation board uses the /PROTO parts. The /PROTO parts are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity.

TABLE 1. TABLE OF DIFFERENCES

SPECIFICATION

ISL71840SEH

ISL71841SEH

Number of Channels

16

32

Supply Current (I+/I-)

350µA (maximum)

400µA (maximum)

Output Leakage (+125°C)

60nA (maximum)

120nA (maximum)