| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
HF88S05 bảng dữ liệu(PDF) 7 Page - King blillion Electronics Co.,Ltd. |
|
|
|||||||||||||||||||||||||||||
HF88S05 bảng dữ liệu(HTML) 7 Page - King blillion Electronics Co.,Ltd. |
|
7 / 13 page ![]() KING BILLION ELECTRONICS CO., LTD 駿 億 電 子 股 份 有 限 公 司 HF88S05 SRAM Series December 18, 2003 7 V1.00 This specification is subject to change without notice. Please contact sales person for the latest version before use. 6.3. Parallel Read Data Mode To Read from SRAM in parallel mode, assert the Strobe in Read Data mode (R_Wn at high and D_Cn low). The data will appear on the Data bus after proper access time. The TP will increment and Checksum will update at the rising edge of Strobe. Register select will be reset by Read Data operation. CS0_n CS1 P_Sn D_Cn R_Wn D[7:0] SCLK TP (TPP, TPH, TPL) 00 01 02 xxxxxx xxxx00 xx0100 020100 55 Parallel Data/Checksum Read Mode TPL TPH TPP T Setup T Hold 020101 020102 020103 aa 78 Checksum 3F T RD T Ass T CG 6.4. Parallel Checksum Read Mode To read the checksum result from previous data transfer (either from SRAM or to SRAM), assert the Strobe signal in Read Command mode (R_Wn is high and D_Cn low). 7. Serial Mode The serial interface is preferable to parallel interface in applications where I/O pins are limited. The interface logic circuit is basically the same as the parallel mode except that an internal shift register and bit counter are used to facilitate transferring serial data from/to external MCU. Multiple devices array can also be used in serial mode. The chip array is connected in daisy chain manner. The MCU’s serial data output pin drives the SDI pin of the first device. The SDO pin of the device then, in turn, drives the SDI pin of the next device in the chain. The SDO pin of the last device then connects back to the MCU’s SDI pin to complete the loop. There could be only one active device in the array at one time, while the other device must be deselected. 7.1. Bi-directional Synchronous Serial Data Interface The Serial interface is a Bi-directional Synchronous Serial Interface. The Serial Data can be written to Registers (such as TPL, TPH, TPP registers) as well as SRAM through the serial interface. The |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |