| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MPC8280 bảng dữ liệu(PDF) 770 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8280 bảng dữ liệu(HTML) 770 Page - Freescale Semiconductor, Inc |
|
770 / 1386 page ![]() SCC BISYNC Mode MPC8280 PowerQUICC II Family Reference Manual, Rev. 1 23-16 Freescale Semiconductor Table 23-13 describes SCCE and SCCM fields. 23.15 SCC Status Registers (SCCS) The SCC status (SCCS) register, seen in Figure 23-9, allows real-time monitoring of RXD. The real-time status of CTS and CD are part of the parallel I/O. 0 2 34 56 78 9 10 11 12 13 14 15 Field — DCC — GRA — TXE RCH BSY TXB RXB Reset 0000_0000_0000_0000 R/W R/W Addr 0x11A10 (SCCE1); 0x11A30 (SCCE2); 0x11A50 (SCCE3); 0x11A70 (SCCE4) 0x11A14 (SCCM1); 0x11A34 (SCCM2); 0x11A54 (SCCM3); 0x11A74 (SCCM4) Figure 23-8. BISYNC Event Register (SCCE)/BISYNC Mask Register (SCCM) Table 23-13. SCCE/SCCM Field Descriptions1 1 Reserved bits in the SCCE should not be masked in the SCCM register. Bits Name Description 0–4 — Reserved, should be cleared. Refer to note 1 below. 5 DCC DPLL CS changed. Set when carrier sense status generated by the DPLL changes. Real-time status can be found in SCCS. This is not the CD status discussed elsewhere. Valid only when DPLL is used. 6–7 — Reserved, should be cleared. Refer to note 1 below. 8 GRA Graceful stop complete. Set as soon the transmitter finishes any message in progress when a GRACEFUL STOP TRANSMIT is issued (immediately if no message is in progress). 9–10 — Reserved, should be cleared. Refer to note 1 below. 11 TXE Tx Error. Set when an error occurs on the transmitter channel. This event is not maskable via the TxBD[I] bit. 12 RCH Receive character. Set when a character is received and written to the buffer. 13 BSY Busy. Set when a character is received and discarded due to a lack of buffers. The receiver resumes reception after an ENTER HUNT MODE command. 14 TXB Tx buffer. Set when a buffer is sent. TXB is set as the last bit of data or the BCS begins transmission. 15 RXB Rx buffer. Set when the CPM closes the receive buffer on the BISYNC channel. 0 567 Field — CS — Reset 0000_0000 R/W R Addr 0x11A17 (SCCS1); 0x11A37 (SCCS2); 0x11A57 (SCCS3); 0x11A77 (SCCS4) Figure 23-9. SCC Status Registers (SCCS) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |