 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MB90583CAPF bảng dữ liệu(PDF) 79 Page - fujitsu semiconductor |
|
|
|||||||||||||||||||||||||||||
MB90583CAPF bảng dữ liệu(HTML) 79 Page - fujitsu semiconductor |
|
|
79 / 110 page  MB90580C Series 79 s ELECTRICAL CHARACTERISTICS 1. Absolute Maximum Ratings (VSS = AVSS = 0.0 V) *1 : Care must be taken that AVCC, AVRH, AVRL, DVCC do not exceed VCC. Also, care must be taken that AVRH, AVRL do not exceed AVCC, and AVRL does not exceed AVRH. *2 : VI and VO shall never exceed VCC + 0.3 V. *3 : The maximum output current is a peak value for a corresponding pin. *4 : • Aplicable to pins : P00 to P07, P10 to P17, P20 to P27, P30 to P37, P40 to P47, P60 to P65, P71 to P74, P80 to P87, P90 to P97, PA0 to PA2, RX • Use within recommended operating conditions. • Use at DC voltage (current) • The +B signal should always be applied with a limiting resistance placed between the +B signal and the microcontroller. (Continued) Parameter Symbol Rating Unit Remarks Min Max Power supply voltage VCC VSS − 0.3 VSS + 6.0 V AVCC VSS − 0.3 VSS + 6.0 V VCC ≥ AVCC *1 AVRH, AVRL VSS − 0.3 VSS + 6.0 V AVCC ≥ AVRH/L, AVRH ≥ AVRL DVCC VSS − 0.3 VSS + 6.0 V VCC ≥ DVCC Input voltage VI VSS − 0.3 VSS + 6.0 V *2 Output voltage VO VSS − 0.3 VSS + 6.0 V *2 Maximum clamp current ICLAMP − 2.0 + 2.0 mA *4 Total maximum clamp current Σ | ICLAMP | 20 mA *4 “L” level maximum output current IOL 15 mA *3 “L” level average output current IOLAV 4mA Average output current = operating current × operating efficiency “L” level total maximum output current ΣIOL 100 mA “L” level total average output current ΣIOLAV 50 mA Average output current = operating current × operating efficiency “H” level maximum output current IOH −15 mA *3 “H” level average output current IOHAV −4mA Average output current = operating current × operating efficiency “H” level total maximum output current ΣIOH −100 mA “H” level total average output current ΣIOHAV −50 mA Average output current = operating current × operating efficiency Power consumption PD 300 mW Operating temperature TA −40 +85 °C Storage temperature Tstg −55 +150 °C |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
