Figure 32. Solder profile

Note:

The component should be limited to a maximum of three passes through this solder profile.

Note:

As the VL53L4ED package is not sealed, only a dry reflow process should be used (such as convection reflow).

Vapor phase reflow is not suitable for this type of optical component.

Note:

The VL53L4ED is an optical component and as such, it should be treated carefully. This would typically include

using a ‘no wash’ assembly process.

VL53L4ED

Handling, moisture, and reflow precautions

DS14256 - Rev 3

page 33/39