| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
56F8014 bảng dữ liệu(PDF) 73 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
56F8014 bảng dữ liệu(HTML) 73 Page - Freescale Semiconductor, Inc |
|
73 / 125 page ![]() Register Descriptions 56F8014 Technical Data, Rev. 9 Freescale Semiconductor 73 Preliminary 6.3.8.13 Configure GPIOA4[1:0] (CFG_A4)—Bits 1–0 These bits select the alternate function for GPIOA4. • 00 = Select PWM4 when peripheral mode is enabled in GPIOA4 (default) • 01 = Select PWM4 when peripheral mode is enabled in GPIOA4 • 10 = Select FAULT1 when peripheral mode is enabled in GPIOA4 • 11 = Select T2 when peripheral mode is enabled in GPIOA4 6.3.9 Peripheral Clock Enable Register (SIM_PCE) The Peripheral Clock Enable register is used to enable or disable clocks to the peripherals as a power savings feature. The clocks can be individually controlled for each peripheral on the chip. The corresponding peripheral should itself be disabled while its clock is shut off. IPBus writes cannot be made to a module that has its clock disabled. Figure 6-11 Peripheral Clock Enable Register (SIM_PCE) 6.3.9.1 I2C IPBus Clock Enable (I2C)—Bit 15 Each bit controls clocks to the indicated peripheral. • 0 = The clock is not provided to the peripheral (the peripheral is disabled) • 1 = Clocks are enabled 6.3.9.2 Reserved—Bit 14 This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing. 6.3.9.3 Analog-to-Digital Converter IPBus Clock Enable (ADC)—Bit 13 Each bit controls clocks to the indicated peripheral. • 0 = The clock is not provided to the peripheral (the peripheral is disabled) • 1 = Clocks are enabled 6.3.9.4 Reserved—Bits 12–7 This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing. 6.3.9.5 Timer IPBus Clock Enable (TMR)—Bit 6 Each bit controls clocks to the indicated peripheral. • 0 = The clock is not provided to the peripheral (the peripheral is disabled) • 1 = Clocks are enabled Base + $C 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Read I2C 0 ADC 0 0 0 0 0 0 TMR 0 SCI 0 SPI 0 PWM Write RESET 0 0 0 0 00 0 0 000 0 0 0 0 0 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |