| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMD27721 bảng dữ liệu(PDF) 46 Page - OSRAM GmbH |
|
|
|||||||||||||||||||||||||||||
TMD27721 bảng dữ liệu(HTML) 46 Page - OSRAM GmbH |
|
46 / 60 page ![]() ams Datasheet Page 45 [v1-21] 2016-Feb-16 Document Feedback TMD2772/ TMD2772WA − Application Information Figure 50: Proximity Sensing Using Single Power Supply VBUS in the above figures refers to the I²C bus voltage which is either VDD or 1.8V. Be sure to apply the specified I²C bus voltage shown in the Available Options table for the specific device being used. The I²C signals and the Interrupt are open-drain outputs and require pull-up resistors. The pull-up resistor (RP) value is a function of the I²C bus speed, the I²C bus voltage, and the capacitive load. The ams EVM running at 400 kbps, uses 1.5kΩ resistors. A 10kΩ pull-up resistor (RPI) can be used for the interrupt line. 1µF VBUS RP RP RPI 1µF Voltage Regulator Per regulator datasheet 22 TMD2772 Or TMD2772WA VDD GND LDR INT SCL SDA LEDA LEDK |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |