TCS3701 datasheet(9/67 Pages) OSRAM

9 / 67 page

Page 8

Datasheet, Public

Document Feedback

[v2-00] 2022-Dec-15

TCS3701 − Electrical Characteristics

All limits are guaranteed. The parameters with min and max

values are guaranteed with production tests or SQC (Statistical

Quality Control) methods.

Figure 9:

Electrical Characteristics of TCS3701, VDD = 1.8 V, TA = 25°C (unless otherwise noted)

Note(s):

1. Values are shown at the VDD pin and do not include current through the IR LED.

2. This parameter indicates the supply current during periods of ALS integration. The ALS gain setting will have an effect on the active

supply current. The ALS gain setting used for this parameter is 128x.

3. Idle state occurs when PON=1 and all functions are disabled. This parameter is measured with LOWPOWER_IDLE=1.

4. Sleep state occurs when PON = 0 and I²C bus is idle. If Sleep state has been entered as the result of operational flow, SAI = 1, PON

will remain high.

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

IDD;ALS

ALS supply current (1)

Active ALS state (2)

(PON=AEN=1, PEN=0)

196

280

μA

IDD;PROX

Proximity supply current (1)

Active proximity state

(PON=PEN=1, AEN=0)

190

260

IDD;IDLE

Idle current (1)

Idle state (3)

(PON=1, AEN=PEN=0)

IDD;SLEEP

Sleep current (1)

Sleep state (4)

0.6

ILEAK

Leakage current

Measured on SDA, SCL, INT,

GPIO

-5

VOL

INT, SDA, GPIO output low

voltage

6mA sink current

0.4

VIH

SCL, SDA input high voltage

1.26

VIL

SCL, SDA input low voltage

0.54

Input pin capacitance

Electrical Characteristics

TCS3701 bảng dữ liệu(PDF) 9 Page - OSRAM GmbH

TCS3701 bảng dữ liệu(HTML) 9 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

bảng dữ liệu tải về

Link URL