L160DB90VC datasheet(31/52 Pages) AMD

31 / 52 page

22358B7 May 5, 2006

Am29LV160D

DA TA

SH EET

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . –65

°C to +150°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . –65

°C to +125°C

Voltage with Respect to Ground

VCC (Note 1) . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V

A9, OE#, and RESET# (Note 2) . –0.5 V to +12.5 V

All other pins (Note 1) . . . . . . . –0.5 V to VCC+0.5 V

Output Short Circuit Current (Note 3) . . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot VSS to –2.0 V

for periods of up to 20 ns. See Figure 7. Maximum DC voltage on input or I/O pins is

VCC +0.5 V. During voltage transitions,

input or I/O pins may overshoot to VCC +2.0 V for periods up to 20 ns. See Figure 8.

2. Minimum DC input voltage on pins A9, OE#, and RESET#

is -0.5 V. During voltage transitions, A9, OE#, and RESET#

may overshoot VSS to –2.0 V for periods of up to 20 ns. See

Figure 7. Maximum DC input voltage on pin A9 is +12.5 V

which may overshoot to 14.0 V for periods up to 20 ns.

3. No more than one output may be shorted to ground at a

time. Duration of the short circuit should not be greater than

one second.

Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any other conditions above those indicated in the operational sections

of this data sheet is not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect

device reliability.

L160DB90VC bảng dữ liệu(PDF) 31 Page - Advanced Micro Devices