UPD17062 datasheet(154/298 Pages) RENESAS

tên linh kiện	UPD17062

Giải thích chi tiết về linh kiện	MOS INTEGRATED CIRCUIT

PDF	298 Pages

Scroll/Zoom	100%

nhà sản xuất	RENESAS [Renesas Technology Corp]

Trang chủ	http://www.renesas.com

Logo

154 / 298 page

152

µPD17062

In reality, however, to avoid skipping the timer process in the above example, a delay is provided between

the negative-going edge of the timer carry FF set pulse and the negative-going edge of the timer interrupt

pulse, as shown in Fig. 12-10 (b).

As shown at (2) in Fig. 12-10, restricting the clock process to within 10 ms can eliminate skipping of a timer

interrupt that would otherwise be caused by a CE reset.

Fig. 12-10

Timing Chart

(a)

(b)

CE pin

Timer carry FF set pulse

Timer interrupt pulse

Timer interrupt

Because the timer carry FF set

pulse goes high, a CE reset occurs

here, thus skipping detection

of a timer interrupt once.

CE pin

Timer carry FF set pulse

Timer interrupt pulse

Timer interrupt

Delay; 10 ms in this case

CE reset

Because there is a delay of 10

ms between the negative-going

edge of the timer interrupt pulse

and the positive-going edge of

the timer carry FF set pulse, a CE

reset does not hamper the

normal timer processing,

provided that the timer interrupt

handling is finished within 10 ms.

UPD17062 bảng dữ liệu(PDF) 154 Page - Renesas Technology Corp