| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MS02A12-32SW bảng dữ liệu(PDF) 18 Page - ITT Industries |
|
|
|||||||||||||||||||||||||||||
MS02A12-32SW bảng dữ liệu(HTML) 18 Page - ITT Industries |
|
18 / 25 page ![]() A-55 www.ittcannon.com Dimensions shown in inches (mm) Specifications and dimensions subject to change A Wiring Instructions Jam Nut Receptacle with Grounding Continuity (for shielded cable) KPT/KPSE ...DZ Cannon KPT/KPSE MIL-C-26482 Series I Connectors KPT/KPSE 7E...DZ Shell øA øB øC D E L S T Size Min. +0.5 Max. Max. 1.0 Max. ±0.25 ±0.25 †8 .360 (6.6) .630 (16.0) .716 (18.2) .524 (13.3) .590 (15.0) 1.850 (47.0) .905 (23.0) .748 (19.0) 10 .362 (9.2) .709 (18.0) .842 (21.4) .634 (16.1) .590 (15.0) 1.850 (47.0) 1.063 (27.0) .874 (22.2) 12 .480 (12.2) .866 (22.0) .968 (24.6) .787 (20.0) .669 (17.0) 1.929 (49.0) 1.248 (31.7) 1.063 (27.0) 14 .598 (15.2) .984 (25.0) 1.094 (27.8) .874 (22.2) .709 (18.0) 1.968 (50.0) 1.374 (34.9) 1.089 (30.2) 16 .720 (18.3) 1.102 (28.0) 1.216 (30.9) 1.031 (26.2) .709 (18.0) 1.968 (50.0) 1.50 (38.1) 1.311 (33.3) 18 .787 (20.0) 1.260 (32.0) 1.342 (34.1) 1.222 (28.5) .709 (18.0) 1.968 (50.0) 1.626 (41.3) 1.437 (36.5) 20 .905 (23.0) 1.340 (34.0) 1.50 (38.1) 1.279 (32.5) .709 (18.0) 2.165 (55.0) 1.811 (46.0) 1.563 (39.7) 22 1.023 (26.0) 1.50 (38.0) 1.626 (41.3) 1.370 (34.8) .709 (18.0) 2.165 (55.0) 1.937 (49.2) 1.689 (42.9) 24 1.133 (28.8) 1.614 (41.0) 1.748 (44.4) 1.492 (37.9) .709 (18.0) 2.165 (55.0) 2.059 (52.3) 1.811 (46.0) † In series KPSE only contact arrangements 8-3A and 8-33 available B C A D E L S L Fixing of shielding braid to connectors with DZ-adapter • Loosen lock nut (5). Slide heat shrink component (6) and lock nut (5) over cable. • Push shielding braid (7) onto endbell (3) and over thread (2). • Fasten shielding braid (7) into rounded groove by means of bailing wire • Fold back protruding shielding braid on cone. • Slide lock nut (5) onto endbell (3). The folded back shielding braid protrudes under the tightened lock nut. • Shrink heat shrink component (6) according to manufacturer’s instructions. (End of heat shrink component to be located in square groove (1)). ca_A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 55 |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |