AX88780 datasheet(6/49 Pages) ASIX

tên linh kiện	AX88780

Giải thích chi tiết về linh kiện	High-Performance Non-PCI Single-Chip 32-bit 10/100M Fast Ethernet Controller

PDF	49 Pages

Scroll/Zoom	100%

nhà sản xuất	ASIX [ASIX Electronics Corporation]

Trang chủ	http://www.asix.com.tw

Logo

6 / 49 page

AX88780

1.0 Introduction

1.1 General Description

AX88780 supports full-duplex or half-duplex operation at 10/100 Mbps speed with auto-negotiation or manual setting.

The AX88780 has two built-in synchronous SRAMs for buffering packet. The one is 32K bytes for receiving packets

from Ethernet; the other is 8K-bytes for transmitting packets from host system to Ethernet. The AX88780 also has 256

bytes built-in configuration registers. For software programming, the total address space used in AX88780 is 64K bytes in

32-bit mode and 16K bytes in 16-bit mode.

Because AX88780 is a SRAM-like device, AX88780 could be treated as a SRAM device and be attached to SRAM

controller of system. Therefore, system can execute DMA cycles to gain the highest performance. AX88780 needs 2 clock

sources. One is the same to host system clock, and the operating frequency is from 40 MHz to 100 MHz. The other is

25Mhz for internal PHY running in MII mode.

1.2 AX88780 Block Diagram

Figure 1 : AX88780 block diagram

ASIX ELECTRONICS CORPORATION

AX88780 bảng dữ liệu(PDF) 6 Page - ASIX Electronics Corporation