| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H7CC-AS bảng dữ liệu(PDF) 39 Page - Omron Electronics LLC |
|
|
|||||||||||||||||||||||||||||
H7CC-AS bảng dữ liệu(HTML) 39 Page - Omron Electronics LLC |
|
39 / 66 page ![]() H7CC-A @ 39 Switching between Preset Counter, Total and Preset Counter, Batch Counter, Dual Counter, Twin Counter, and Tachometer Operation Select which H7CC configuration is used (i.e., preset counter, total and preset counter, batch counter, dual counter, twin counter, or tachometer) in configuration selection mode. Hold Function The measurement value (display value) and output are sustained while the hold input is ON. Note: The output will maintain the current status when hold operation is performed. Example: Output mode setting Operation Lower limit Select the function using the UP1 Key (DW1 Key) . Note: The modes that can be selected depend on the model. (Refer to the Table.) bcnt dcnt taco twn 1cnt 2cnt tcnt 1cnt func H7CC-AW H7CC-AU UP1+UP6 or DW1+DW6 (Press and hold for 2 s) *1 When the mode is changed to configuration selection mode, the present value is reset, outputs turn OFF, and counting (measuring) stops. *2 Setting changes made in configuration selection mode are enabled when the mode is changed to run mode. If the configuration is changed, the set value (or set value 1 and set value 2), comparison value 1 and comparison value 2 are initialized. Power ON Configuration selection Note Note: At the time of delivery *, the H7CC is set to the 1-stage preset counter configuration or 2-stage preset counter configuration. *1 *2 Model Default mode 2-stage preset counter 1-stage preset counter 1-stage preset counter * Table Default Modes and Selectable Functions Any mode Any mode Other models 1-stage preset or total preset counter only Selectable mode To shift to the configuration selection mode, press UP1+UP6 or DW1+DW6 for 2 seconds or longer. (1-stage preset counter) (2-stage preset counter) (Total and preset counter) (Batch counter) (Dual counter) (Twin counter) (Tachometer) OUT Display value Hold input * (hold operation) Comparison value (lower limit) Sustained display value Sustained output Actual input |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |