FAM65CR51AXZ1, FAM65CR51AXZ2

www.onsemi.com

7

Figure 3. Timing Measurement Variable Definition

Table 8. PARAMETER OF SWITCHING CHARACTERISTICS

The measurement conditions are described in the Table 3.

For signal definition please check Figure 3 above.

The rise time is the time to discharge output capacitance, Coss.

The measurement conditions are described in the Table 3.

For signal definition please check Figure 3 above.

Is the sum of turn−on−delay and rise time

td(off) is the time to discharge Ciss after the MOSFET is turned off.

The measurement conditions are described in the Table 3.

For signal definition please check Figure 3 above.

The fall time, tf, is the time to charge the output capacitance, Coss.

The measurement conditions are described in the Table 3.

For signal definition please check Figure 3 above.

Is the sum of turn−off−delay and fall time