Maxim Integrated │ 7

71M6545T/71M6545HT

Energy Meter ICs

www.maximintegrated.com

Electrical Characteristics

(All voltages referenced to GNDA.)

Supplies and Ground Pins

GNDD...................................................................-0.1V to +0.1V

Analog Output Pins

Analog Input Pins

IADC0-7, VADC8-10...........................-10mA to +10mA, -0.5V to

XIN, XOUT...............................-10mA to +10mA, -0.5V to +3.0V

DIO Pins

Configured as Digital Inputs ....-10mA to +10mA, -0.5V to +6.0V

Configured as Digital Outputs ............-10mA to +10mA, -0.5V to

Digital Pins

Inputs (PB, RESET, RX, ICE_E, TEST)...........-10mA to +10mA,

-0.5V to +6.0V

Temperature

Operating Junction Temperature (peak, 100ms).............+140°C

Operating Junction Temperature (continuous) ................+125°C

Storage Temperature........................................ -45°C to +140°C

Lead Temperature (soldering, 10s) .................................+300°C

Soldering Temperature (reflow).......................................+260°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these

or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect

device reliability.

Absolute Maximum Ratings

anteed by design and characterization.)

PARAMETER

CONDITIONS

MIN

TYP

MAX

UNITS

RECOMMENDED OPERATING CONDITIONS

Voltage

Precision metering operation

3.0

3.6

V

PLL_FAST = 1

2.65

3.8

V

PLL_FAST = 0

2.40

3.8

2.0

3.8

V

Operating Temperature

-40

+85

°C

INPUT LOGIC LEVELS

Digital High-Level Input Voltage

2

V

Digital Low-Level Input Voltage

0.8

V

RTXT, E_RST, E_TCLK

10

100

µA

RX, OPT_TX

10

100

µA

CSZ (SEGDIO36)

10

100

µA

Digital Inputs

-1

+1

µA

ICE_E, RESET, TEST

10

100

µA

Other Digital Inputs

-1

+1

µA