| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AT25SF321 bảng dữ liệu(PDF) 19 Page - Dialog Semiconductor |
|
|
|||||||||||||||||||||||||||||
AT25SF321 bảng dữ liệu(HTML) 19 Page - Dialog Semiconductor |
|
19 / 48 page ![]() 18 AT25SF321 DS-25SF321–047F–8/2017 internal address counter increments and crosses into the suspended area, the device will then start outputting undefined data until the internal address counter crosses to an unsuspended area. A program operation is not allowed to a block that has been erase suspended. If a program operation is attempted to an erase suspended block, then the program operation will abort and the WEL bit in the Status Register will be reset back to a logical "0" state. Likewise, an erase operation is not allowed to a block that included the page that has been program suspended. If attempted, the erase operation will abort and the WEL bit in the Status Register will be reset to a logical "0" state. If an attempt is made to perform an operation that is not allowed during a program or erase suspend, such as a Write Status Register operation, then the device will simply ignore the opcode and no operation will be performed. The state of the WEL bit in the Status Register will not be affected. Table 7-1. Operations Allowed and Not Allowed During a Program/Erase Suspend Command Command During Program Suspend During Erase Suspend Read Commands Read Array (03h, 0Bh, 3Bh, BBh, 6Bh, EBh) Allowed (1) Allowed(1) Continuous Read Reset (FFh) Allowed(1) Allowed(1) Program and Erase Commands Block Erase (20h, 52h, D8h) Not Allowed Not Allowed Chip Erase (C7h, 60h) Not Allowed Not Allowed Byte/Page Program (02h) Not Allowed Allowed(1) Program/Erase Suspend (75h) Not Allowed Not Allowed Program/Erase Resume (7Ah) Allowed Allowed Protection Commands Write Enable (06h) Allowed Allowed Write Disable (04h) Allowed Allowed Security Commands Erase Security Register Page (44h) Not Allowed Not Allowed Program Security Register Page (42h) Not Allowed Not Allowed Read Security Register Page (48h) Allowed Allowed Status Register Commands Read Status Register (05h, 35h) Allowed Allowed Write Status Register (01h) Not Allowed Not Allowed Volatile Write Enable Status Register (50h) Not Allowed Not Allowed Miscellaneous Commands Read Manufacturer and Device ID (9Fh) Allowed Allowed Read ID (90h) Allowed Allowed Deep Power-Down (B9h) Not Allowed Not Allowed Resume from Deep Power-Down (ABh) Allowed (2) Allowed(2) 1. Allowed for all 64K-byte blocks other than the one currently suspended. 2. Allowed for reading Device ID. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |