| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
HMC8193LC4TR-R5 bảng dữ liệu(PDF) 5 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
HMC8193LC4TR-R5 bảng dữ liệu(HTML) 5 Page - Analog Devices |
|
5 / 36 page ![]() Data Sheet HMC8193 Rev. B | Page 5 of 36 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS 13 1 3 4 2 NIC NIC GND RF 5 6 GND NIC NIC 14 GND 15 LO 16 GND 17 NIC 18 NIC HMC8193 TOP VIEW (Not to Scale) NOTES 1. NOT INTERNALLY CONNECTED. NO CONNECTION IS REQUIRED. THESE PINS CAN BE CONNECTED TO RF/DC GROUND WITHOUT AFFECTING PERFORMANCE. 2. EXPOSED PAD. THE EXPOSED PAD MUST BE CONNECTED TO RF/DC GROUND. Figure 2. Pin Configuration Table 4. Pin Function Descriptions Pin No. Mnemonic Description 1, 2, 6 to 8, 10, 13, 17 to 24 NIC Not Internally Connected. No connection is required. These pins can be connected to RF/dc ground without affecting performance. 3, 5, 12, 14, 16 GND Ground Connect. These pins and package bottom must be connected to RF/dc ground. See Figure 3 for the interface schematic. 4 RF Radio Frequency. This pin is ac-coupled and matched to 50 Ω. See Figure 5 for the interface schematic. 9 IF1 First and Quadrature Intermediate Frequency. This pin is dc-coupled. For applications not requiring operation to dc, dc block this port externally using a series capacitor with a value selected to pass the necessary IF frequency range. For operation to dc, this pin must not source or sink more than 6 mA of current; otherwise, the device does not function and may fail. See Figure 4 for the interface schematic. 11 IF2 Second Quadrature Intermediate Frequency. This pin is dc-coupled. For applications not requiring operation to dc, dc block this port externally using a series capacitor with a value selected to pass the necessary IF frequency range. For operation to dc, this pin must not source or sink more than 6 mA of current; otherwise, the device does not function and may fail. See Figure 4 for the interface schematic. 15 LO Local Oscillator. This pin is ac-coupled and matched to 50 Ω. See Figure 6 for the interface schematic. EPAD Exposed Pad. The exposed pad must be connected to RF/dc ground. INTERFACE SCHEMATICS GND Figure 3. GND Interface Schematic IF1, IF2 Figure 4. IF1, IF2 Interface Schematic RF Figure 5. RF Interface Schematic LO Figure 6. LO Interface Schematic |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |