| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MCP3462R-E/ST bảng dữ liệu(PDF) 40 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP3462R-E/ST bảng dữ liệu(HTML) 40 Page - Microchip Technology |
|
40 / 118 page ![]() MCP3461/2/4R DS20006404C-page 40 2020-2021 Microchip Technology Inc. 5.1.3 ADC OFFSET CANCELLATION ALGORITHM The input multiplexer and the ADC include an offset cancellation algorithm that cancels the offset contribution of the ADC. This offset cancellation algorithm is con- trolled by the AZ_MUX bit in the CONFIG2 register. When AZ_MUX = 0 (default), the offset cancellation algo- rithm is disabled and the conversions are not affected by this setting. When AZ_MUX = 1, the algorithm is enabled. When the offset cancellation algorithm is enabled, ADC takes two conversions, one with the differential input as VIN+/VIN-, one with VIN+/VIN- inverted. Equation 5-2 calculates the ADC output code. When AZ_MUX = 1, the Conversion Time, TCONV, is multiplied by two, compared to the default case where AZ_MUX = 0. EQUATION 5-2: AZ_MUX CONVERSION RESULT This technique allows the cancellation of the ADC offset error and the achievement of ultra-low offset without any digital calibration. The resulting offset is the residue of the difference between the two conversions, which is on the order of magnitude of the noise floor. This offset is effectively canceled at every conversion, so the residual offset error temperature drift is extremely low. For One-Shot mode, the conversion time is simply multiplied by two. Enabling the AZ_MUX bit is not compatible with the Continuous Conversion mode (because it effectively multiplexes the inputs in between each conversion). If AZ_MUX = 1 and CONV_MODE = 11 (Continuous Conversion mode), the device will reset the digital filter in between each conversion, and will therefore, have an output data rate of 1/(2 * TCONV). The Continuous mode is replaced by a series of One-Shot mode conversions with no delay in between each conversion (see Section 5.14 “Con- version Modes” and Figure 5-5 for more details about the Conversion modes). ADC Output Code (AZ_MUX = 1) ADC Output at +VIN ADC Output at -VIN – 2 ------------------------------------------------------------------------------------------------------------------------ = |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |