GC5316 datasheet(41/75 Pages) TI

41 / 75 page

GC5316

SLWS154A − JANUARY 2004 − REVISED MARCH 2004

www.ti.com

Table 16. Programming

VARIABLE

DESCRIPTION

sumchn_sel_a(3:0)

Enable bits signal A contribution to the four sum chain outputs.

Signal A Out

0000

Signal A added to no busses

0001

Signal A I/Q to bus0

0010

Signal A I/Q to bus1

0010

Signal A I/Q to bus1

0100

Signal A I/Q to bus2

1000

Signal A I/Q to bus3

Note: Signal A output can contribute to any combination of the four sumchain outputs.

The above 4-bit code can range from 0 to 15.

sumchn_sel_b(3:0)

Enable bits for signal B contribution to the four sum chains (only when in CDMA

mode).

Signal B Out

0000

Signal B added to no busses

0001

Signal B I/Q to bus0

0010

Signal B I/Q to bus1

0100

Signal B I/Q to bus2

1000

Signal B I/Q to bus3

Note: Signal B output can contribute to any combination of the four sumchain outputs.

The above 4-bit code can range from 0 to 15.

3.2

Transmit Sum Chain Shifting and Rounding

Figure 35. Final Sum Chain Scale and Round Block

Summed data is scaled from 26 bits down to 18 bits. The desired 18 bits can be taken anywhere over the 26 bit sum

chain output window via a programmable register. These 18 bits can range from sumchain(25:8) on the top end, to

sumchain (17:0) on the bottom end of the 26 bit output.

The scaled data is then hard-limited and rounded to 18, 16, 14, or 12 bits. Rounded data is MSB justified with the

bottom bits zeroed. For example, 12-bit rounding would force the output data to the top 12 bits of the 18-bit word and

the bottom 6 bits would be zeroed.

Gain = 2interf_scale−5

GC5316 bảng dữ liệu(PDF) 41 Page - Texas Instruments

GC5316 bảng dữ liệu(HTML) 41 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

bảng dữ liệu tải về

Link URL