AM6421 datasheet(55/237 Pages) TI

55 / 237 page

• PD: Internal pulldown

• PU/PD: Internal pullup and pulldown

• An empty box means No pull.

13.DSIS: The deselected input state (DSIS) indicates the state driven on the peripheral input (logic "0", logic "1", or "pad" level) when the peripheral pin

function is not selected by any of the PINCNTLx registers.

• 0: Logic 0 driven on the input signal port of the peripheral.

• 1: Logic 1 driven on the input signal port of the peripheral.

• pad: Logic state of the pad is driven on the input signal port of the peripheral.

• An empty box means Not Applicable.

14.RXACTIVE / TXDISABLE: This column indicates the default value of the RXACTIVE / TXDISABLE bits in the PADCONFIG register.

• RXACTIVE: 0 = receiver disabled, 1 = receiver enabled.

• TXDISABLE: 0 = driver enabled, 1 = driver disabled.

• An empty box means Not Applicable.

Note

Configuring two pins to the same input signal is not supported as it can yield unexpected results. This can be easily prevented with the

proper software configuration (HiZ mode is not an input signal).

Note

When a pad is set into a multiplexing mode which is not defined by pin multiplexing, that pad’s behavior is undefined. This should be

avoided.

www.ti.com

AM6442, AM6441, AM6421

AM6412, AM6411

SPRSP56 – JANUARY 2021

Submit Document Feedback

Product Folder Links: AM6442 AM6441 AM6421 AM6412 AM6411

AM6421 bảng dữ liệu(PDF) 55 Page - Texas Instruments

AM6421 bảng dữ liệu(HTML) 55 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL