STM32WB35CCU6ATR datasheet(36/193 Pages) STMICROELECTRONICS

tên linh kiện	STM32WB35CCU6ATR

Giải thích chi tiết về linh kiện	Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5 and 802.15.4 radio solution

PDF	193 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

36 / 193 page

Functional overview

STM32WB55xx STM32WB35xx

36/193

DS11929 Rev 10

8. SRAM2a content is preserved when the bit RRS is set in PWR_CR3 register.

9. Stop 0 only. SMPS is automatically switched to Bypass or Open mode during Low power operation.

10. Some peripherals with wakeup from Stop capability can request HSI16 to be enabled. In this case, HSI16 is woken up by

the peripheral, and only feeds the peripheral which requested it. HSI16 is automatically put off when the peripheral does not

need it anymore.

11. The HSE can be used by the RF subsystem according with the need to perform RF operation (Tx or Rx).

12. MSI maximum frequency.

13. In case RF will be used and HSE will fail.

14. UART and LPUART reception is functional in Stop mode, and generates a wakeup interrupt on Start, address match or

received frame event.

15. I2C address detection is functional in Stop mode, and generates a wakeup interrupt in case of address match.

16. I/Os can be configured with internal pull-up, pull-down or floating in Standby mode.

17. I/Os can be configured with internal pull-up, pull-down or floating in Shutdown mode but the configuration is lost when

exiting the Shutdown mode.

STM32WB35CCU6ATR bảng dữ liệu(PDF) 36 Page - STMicroelectronics