XIO2001IPNP datasheet(105/144 Pages) TI

105 / 144 page

105

XIO2001

www.ti.com

SCPS212I – MAY 2009 – REVISED JANUARY 2016

Product Folder Links: XIO2001

Submit Documentation Feedback

8.6.6 Serial-Bus Word Address Register

The value written to the serial-bus word address register represents the word address of the byte being read

from or written to on the serial-bus interface. The word address is loaded into this register prior to writing the

serial-bus slave address register that initiates the bus cycle. This register is an alias for the serial-bus word

address register in the PCI header (offset B1h, see Serial-Bus Word Address Register). This register is reset by

a PCI Express reset (PERST), a GRST, or the internally-generated power-on reset.

Device control memory window register offset:

45h

Read/Write

Default value:

00h

BIT NUMBER

RESET STATE

8.6.7 Serial-Bus Slave Address Register

The serial-bus slave address register indicates the address of the device being targeted by the serial-bus cycle.

This register also indicates if the cycle will be a read or a write cycle. Writing to this register initiates the cycle on

the serial interface. This register is an alias for the serial-bus slave address register in the PCI header (offset

B2h, see Serial-Bus Slave Address Register ). See Table 77 for a complete description of the register contents.

Device control memory window register offset:

46h

Read/Write

Default value:

00h

BIT NUMBER

RESET STATE

(1)

These bits are reset by a PCI Express reset (PERST), a GRST, or the internally-generated power-on reset.

Table 77. Serial-Bus Slave Address Register Descriptions

BIT

FIELD NAME

ACCESS

DESCRIPTION

7:1(1)

SLAVE_ADDR

Serial-bus slave address. This 7-bit field is the slave address for a serial-bus read or write

transaction. The default value for this field is 000 0000b.

0(1)

RW_CMD

Read/write command. This bit determines if the serial-bus cycle is a read or a write cycle.

0 = A single byte write is requested (default)

1 = A single byte read is requested

8.6.8 Serial-Bus Control and Status Register

The serial-bus control and status register controls the behavior of the serial-bus interface. This register also

provides status information about the state of the serial-bus. This register is an alias for the serial-bus control and

status register in the PCI header (offset B3h, see Serial-Bus Control and Status Register). See Table 78 for a

complete description of the register contents.

Device control memory window register offset:

47h

Read-only, Read/Write, Read/Clear

Default value:

00h

BIT NUMBER

RESET STATE

XIO2001IPNP bảng dữ liệu(PDF) 105 Page - Texas Instruments

XIO2001IPNP bảng dữ liệu(HTML) 105 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL