Executing and debugging firmware using a software toolchains

UM1928

12/22

DocID028162 Rev 1

Figure 7. EWARM Go button

5.2

MDK-ARM toolchain

This is the procedure for compiling/linking and executing an existing MDK-ARM project.

1.

Open the Keil MDK-ARM Microcontroller Kit.

Figure 8 shows the “Keil uVision5” windows.

Figure 8. uVision5 IDE

2.

In the Project menu, select Open Project. Browse to select either an example or

demonstration or template project file, and click Open to launch it in the Project

window.

3.

In the Project menu, select Rebuild All target files to compile the project.

4.

If the project is successfully compiled, the following window in Figure 9: MDK-ARM

project successfully compiled is displayed.