DocID028162 Rev 1

11/22

UM1928

Executing and debugging firmware using a software toolchains

21

If the user needs to change the project settings (Include and preprocessor defines), he must

follows the project options:



For Include directories.



Project>Options…>C/C++ compiler>.



For pre-processor defines.



Project>Options…C/C++ compiler>pre-processor>.

5.

In the IAR Embedded Workbench IDE, from the Project menu, select Download and

Debug or, alternatively, click the Download and Debug button in the toolbar, to program

the Flash memory and begin debugging.

Figure 5. Download and Debug button

6.

The debugger in the IAR Embedded Workbench can be used to debug source code at

C and assembly levels, to set breakpoints, to monitor individual variables and watch

events during the code execution.

Figure 6. IAR Embedded Workbench debugger screen

To run the application, from the Debug menu, select Go. Alternatively, click the Go button in

the toolbar to run the application.