STM8S datasheet(201/467 Pages) STMICROELECTRONICS

201 / 467 page

DocID14587 Rev 14

201/467

RM0016

16-bit advanced control timer (TIM1)

261

Channel configured in input

654

3210

IC1F[3:0]

IC1PSC[1:0]

CC1S[1:0]

Bits 7:4 IC1F[3:0]: Input capture 1 filter

This bitfield defines fSAMPLING, the frequency used to sample TI1 input and the length of the digital

filter applied to TI1. The digital filter is made of an event counter in which N events are needed to

validate a transition on the output:

0000: No filter, fSAMPLING= fMASTER

0001: fSAMPLING=fMASTER, N = 2

0010: fSAMPLING=fMASTER, N = 4

0011: fSAMPLING=fMASTER, N = 8

0100: fSAMPLING=fMASTER/2, N = 6

0101: fSAMPLING=fMASTER/2, N = 8

0110: fSAMPLING=fMASTER/4, N = 6

0111: fSAMPLING=fMASTER/4, N = 8

1000: fSAMPLING=fMASTER/8, N = 6

1001: fSAMPLING=fMASTER/8, N = 8

1010: fSAMPLING=fMASTER/16, N = 5

1011: fSAMPLING=fMASTER/16, N = 6

1100: fSAMPLING=fMASTER/16, N = 8

1101: fSAMPLING=fMASTER/32, N = 5

1110: fSAMPLING=fMASTER/32, N = 6

1111: fSAMPLING=fMASTER/32, N = 8

Note: Even on channels that have a complementary output, this bit field is not preloaded and does

not take into account the content of the CCPC bit (in the TIM1_CR2 register).

Bits 3:2 IC1PSC[1:0]: Input capture 1 prescaler

This bitfield defines the ratio of the prescaler acting on CC1 input (IC1). The prescaler is reset as

soon as CC1E = 0 (TIM1_CCER register).

00: No prescaler, capture is made each time an edge is detected on the capture input

01: Capture is made once every 2 events

10: Capture is made once every 4 events

11: Capture is made once every 8 events

Bits 1:0 CC1S[1:0]: Capture/compare 1 selection

This bitfield defines the direction of the channel (input/output) and the used input.

00: CC1 channel is configured as output

01: CC1 channel is configured as input, IC1 is mapped on TI1FP1

10: CC1 channel is configured as input, IC1 is mapped on TI2FP1

11: CC1 channel is configured as input, IC1 is mapped on TRC. This mode works only if an internal

trigger input is selected through the TS bit (TIM1_SMCR register).

Note: CC1S bits are writable only when the channel is OFF (CC1E = 0 in TIM1_CCER1).

STM8S bảng dữ liệu(PDF) 201 Page - STMicroelectronics

STM8S bảng dữ liệu(HTML) 201 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL