4225-RPM datasheet(35/45 Pages) TEKTRONIX

35 / 45 page

Datasheet

TEK.COM

Formulator Constants

The Formulator supports user-supplied constants for use in parameter extractions.

These constants are factory installed:

PI = 3.14159 rad (π)

K = 1.38065 × 10–23 J/K (Boltzmann’s constant)

Q = 1.60218 × 10–19 C (Charge of electron)

0 = 9.10938 × 10

–31

kg (Electron mass)

V = 1.60218 × 10

–19

J (Electron Voltage)

0 = 1.25664 × 10

–6

N/A2 (Permeability)

0 = 8.85419 × 10

–12

F/m (Permittivity of a Vacuum)

H = 6.62607 × 10–34 m2 * kg/s (Planck’s constant)

C = 2.99792 × 10+8 m/s (Speed of light)

KT/Q = 0.02568 V (Thermal Voltage)

Automation

Test Sequencing

Clarius provides point-and-click test sequencing on a device, a group of devices (subsite, module, or test

element group), or a user-programmable number of probe sites on a wafer.

Prober Control

Keithley provides integrated prober control for supported analytical probers when test sequencing is

executed on a user-programmable number of probe sites on a wafer. Contact the factory for a list of

supported analytical probers. A manual prober mode prompts the operator to perform prober operations

during the test sequence.

Supported Probers

Manual Prober

Use the manual prober driver to test without utilizing automatic prober functionality. Manual prober

replaces all computer control of the prober with that of the operator. At each prober command, a dialog

box appears, instructing the operator what operation is required.

Fake Prober

The Fake prober is useful when prober actions are not desired, such as when debugging, without having to

remove prober commands from a sequence.

Supported Semi-automatic (Analytical) Probers

FormFactor (formerly Cascade Microtech) SummitTM 12K Series - Verified with Nucleus UI,

compatible with Velox

Karl Suss Model PA-200 - Verified with Wafermap for ProberBench NT, NI-GPIB Driver for ProberBench

NT, PBRS232 Interface for ProberBench NT, Navigator for ProberBench NT, Remote Communicator for

ProberBench NT

MicroManipulator 8860 Prober - Verified with pcBridge, pcLaunch, pcIndie, pcWfr, pcNav, pcRouter

Signatone CM500 driver also works with other Signatone probers with interlock controller such as the

WL250 and S460SE

Wentworth Laboratories Pegasus™ FA Series

Other probers supported but not listed

Supported Cryogenic Temperature Controllers

LakeShore Model 336 Cryogenic Temperature Controller

4225-RPM bảng dữ liệu(PDF) 35 Page - TEKTRONIX, INC.

4225-RPM bảng dữ liệu(HTML) 35 Page - TEKTRONIX, INC.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

bảng dữ liệu tải về

Link URL