V62SLASH12615-01XE-R datasheet(82/98 Pages) TI1

tên linh kiện	V62/12615-01XE-R

Giải thích chi tiết về linh kiện	DP83848-EP PHYTER??Military Temperature Single Port 10/100 Mbps Ethernet Physical Layer Transceiver

PDF	98 Pages

Scroll/Zoom	100%

nhà sản xuất	TI1 [Texas Instruments]

Trang chủ	http://www.ti.com

Logo

82 / 98 page

DP83848-EP

SLLSEC6E – SEPTEMBER 2012 – REVISED JUNE 2019

www.ti.com

Submit Documentation Feedback

Product Folder Links: DP83848-EP

Power Supply Recommendations

The device Vdd supply pins should be bypassed with low impedance 0.1-µF surface mount capacitors. To

reduce EMI, the capacitors should be places as close as possible to the component Vdd supply pins,

preferably between the supply pins and the vias connecting to the power plane. In some systems it may

be desirable to add 0-Ω resistors in series with supply pins, as the resistor pads provide flexibility if adding

EMI beads becomes necessary to meet system level certification testing requirements. (See Figure 7-1) It

is recommended the PCB have at least one solid ground plane and one solid Vdd plane to provide a low

impedance power source to the component. This also provides a low impedance return path for non-

differential digital MII and clock signals. A 10-µF capacitor should also be placed near the PHY component

for local bulk bypassing between the Vdd and ground planes.

Figure 7-1. Vdd Bypass Layout

V62/12615-01XE-R bảng dữ liệu(PDF) 82 Page - Texas Instruments