GD25B32CSIG datasheet(22/56 Pages) GIGADEVICE

22 / 56 page

3.3V Uniform Sector

Dual and Quad Serial Flash

GD25B32C

7.11.

Quad I/O Fast Read (EBH)

The Quad I/O Fast Read command is similar to the Dual I/O Fast Read command but with the capability to input the

3-byte address (A23-

0) and a “Continuous Read Mode” byte and 4-dummy clock 4-bit per clock by IO0, IO1, IO2, IO3, each

bit being latched in during the rising edge of SCLK, then the memory contents are shifted out 4-bit per clock cycle from IO0,

IO1, IO2, IO3. The command sequence is shown in followed Figure12. The first byte addressed can be at any location. The

address is automatically incremented to the next higher address after each byte of data is shifted out. The Quad Enable bit

(QE) of Status Register (S9) must be set to enable for the Quad I/O Fast read command.

Quad I/O Fast Read with

“Continuous Read Mode”

The Quad I/O Fast Read command can further reduce command overhead through setting the “Continuous Read

Mode” bits (M7-0) after the input 3-byte address (A23-A0). If the “Continuous Read Mode” bits (M5-4) = (1, 0), then the next

Quad I/O Fast Read command (after CS# is raised and then lowered) does not require the EBH command code. The

command sequence is shown in followed Figure13

. If the “Continuous Read Mode” bits (M5-4) do not equal to (1, 0), the

next command

requires the first EBH command code, thus returning to normal operation. A “Continuous Read Mode”

Reset command can be used to reset (M5-4) before issuing normal command.

Figure 12. Quad I/O Fast Read Sequence Diagram (M5-4

≠ (1, 0))

Figure 13. Quad I/O Fast Read Sequence Diagram (M5-4= (1, 0))

Command

EBH

CS#

SCLK

IO0

IO1

9 10 11 12 13 14 15

16 17 18 19 20 21 22 23

A23-16 A15-8 A7-0

M7-0

IO2

IO3

Dummy

Byte1 Byte2

CS#

SCLK

9 10 11 12 13 14 15

IO0

IO1

IO2

IO3

A23-16 A15-8 A7-0

M7-0

Dummy

Byte1 Byte2

GD25B32CSIG bảng dữ liệu(PDF) 22 Page - GigaDevice Semiconductor (Beijing) Inc.

GD25B32CSIG bảng dữ liệu(HTML) 22 Page - GigaDevice Semiconductor (Beijing) Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

bảng dữ liệu tải về

Link URL