| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
106980 bảng dữ liệu(PDF) 18 Page - PHOENIX CONTACT |
|
|
|||||||||||||||||||||||||||||
106980 bảng dữ liệu(HTML) 18 Page - PHOENIX CONTACT |
|
18 / 25 page ![]() TRIO-PS-2G/1AC/12DC/10 106980_en_00 PHOENIX CONTACT 18 / 25 14 Output A DC voltage for supplying the load is provided at the output of the power supply. The load is connected via the OUTPUT +/- connection terminal blocks. By default, the power supply is pre-set to a nominal output voltage of 12 V DC. The output voltage can also be set to the range from 12 V DC to 18 V DC using the potentiometer in order to compensate for a possible voltage drop due to the long cable lengths between the power supply and the load to be supplied. 14.1 Position of output terminals Figure 14 Position of output terminals 14.2 Protection of the secondary side The power supply is electronically short-circuit-proof and idling-proof. In the event of an error, the output voltage is limited. It must be ensured that all output cables are dimensioned accordingly for the maximum output current or have separate protection. The connecting cables on the secondary side should have large cross sections to keep the voltage drops in the cables as low as possible. Figure 15 Schematic diagram, switching the output terminals 14.3 Output characteristic curve The power supply works with a dynamic power reserve, the dynamic boost, as shown in the U/I characteristic curve in the figure. In the event of a secondary-side short circuit or overload, the output current is limited to 1.5 x I N. The module does not switch off, but supplies a continuous output current instead. The secondary voltage is then reduced until the short circuit is eliminated. The U/I characteristic curve with the dynamic power reserve enables high switch-on currents of capacitive loads or inductive loads to be supplied reliably. Figure 16 U/I characteristic curve with dynamic load reserve –U N = 12 V DC –I N = 10 A –I dyn. BOOST = 15 A –P N = 120 W –P dyn. BOOST = 180 W + + - - - + + - - - R Load I [A] OUT U N I N U < 0,9 x U N t≥5 s 1,5 x I N dyn. Boost |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |