| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
106980 bảng dữ liệu(PDF) 14 Page - PHOENIX CONTACT |
|
|
|||||||||||||||||||||||||||||
106980 bảng dữ liệu(HTML) 14 Page - PHOENIX CONTACT |
|
14 / 25 page ![]() TRIO-PS-2G/1AC/12DC/10 106980_en_00 PHOENIX CONTACT 14 / 25 9Cooling Heat is dissipated from the power supply via the heatsinks integrated into the housing surfaces. Convection to dissipate heat from the power supply only takes place in small dimensions above the housing openings. Figure 4 Convection 10 Mounting position and dimensions 10.1 Mounting position Figure 5 Locked areas Possible mounting positions: Normal mounting position, installation depth 115 mm (+ DIN rail) The power supply can be aligned without minimum lateral clearance up to an ambient temperature of 40°C. In a temperature range up to ≤ 70°C, a lateral minimum clearance of 10 mm between two active components (e.g., power supply) is required. The device can be snapped onto all DIN rails in accordance with EN 60715 and should be mounted in the normal mounting position. To ensure sufficient wiring space to wire the power supply, we recommend a vertical minimum clearance from other devices of 50 mm. Depending on the cable duct used, a smaller clearance may be possible. 35 + + - - - L/+ N/- 11 2- 8V DC OK 13 14 |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |