8448 datasheet(18/19 Pages) PHOENIX

18 / 19 page

AXL E PN DIO16 M12 6P

8448_en_04

PHOENIX CONTACT

Startup

11.1

Delivery state/default settings

By default upon delivery, the following functions and fea-

tures are available:

PROFINET

Firmware update

System identification

Web-based Management (WBM)

11.2

Starting the firmware

Once you have connected the power, the firmware is

started. After completion of the firmware boot process, the

RDY LED lights up green. After completion of the firmware

boot process, the BF LED either lights up or flashes.

11.3

Firmware update

In order to update the firmware of the device, the device

must be provided with a firmware container via a TFTP

server or it must be loaded onto the device via FTP. Any FTP

client or TFTP server can be used for this. The update must

always be initiated by the web-based management. When

carrying out the firmware update, the RDY LED flashes yel-

low.

11.4

Restoring the default settings

The default settings can be restored via WBM.

To do this, go to:

Administration web page > default settings and follow the in-

structions.

PROFINET name:

No name assigned

IP parameters:

0.0.0.0

Subnet mask:

0.0.0.0

Default Gateway:

0.0.0.0

Device designation:

AXL E PN DIO16 M12 6P

Vendor ID:

00B0

hex

Device ID:

0104

hex

Firmware update on next

restart:

deactivated

TFTP server IP address:

192.168.210.211

Firmware file name:

FIRMWARE.NXF

Device name:

No name assigned

Description:

No description assigned

Device location:

No location assigned

Contact:

No contact assigned

User name:

admin

Password:

private

8448 bảng dữ liệu(PDF) 18 Page - PHOENIX CONTACT

8448 bảng dữ liệu(HTML) 18 Page - PHOENIX CONTACT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

bảng dữ liệu tải về

Link URL