OL2385SWUG datasheet(29/64 Pages) NXP

29 / 64 page

NXP Semiconductors

OL2385SWUG

SIGFOX software driver

OL2385SWUG

All information provided in this document is subject to legal disclaimers.

User guide

Rev. 2.1 — 6 April 2018

29 / 64

6.2.5 Installing the software using KDS

This section describes how to install Kinetis Design Studio and use the embedded

software driver for SIGFOX application development.

MCUXpresso SDK is a comprehensive collection of software resources that

supports NXP microcontroller development. For more information, go to the website

mcuxpresso.nxp.com.

6.2.5.1 Installing Kinetis Design Studio

This procedure explains how to obtain and install the latest version of Kinetis Design

Studio (version 3.2.0 in this guide). The procedure for MCUXpresso IDE installation or

S32 Design Studio installation is similar.

Note:

The component and some examples in the component package are intended for Kinetis

Design Studio 3.2.0 or newer and MCUXpresso IDE 10.1.1 or newer. If Kinetis Design

Studio 3.2.0 or MCUXpresso 10.1.1 is already installed on the system, skip this section.

1. Obtain the latest Kinetis Design Studio 3.2.0 installer file from the NXP website here:

www.nxp.com/KDS

2. Obtain the MCUXpresso IDE installer file from NXP website here: www.nxp.com/

MCUXpresso

3. Obtain the S32 Design Studio installer file from the NXP website here: www.nxp.com/

S32DS

Run the executable file and follow the instructions.

6.2.5.2 Downloading the MCUXpresso SDK library

This step is necessary only when creating a new MCUXpresso SDK project, in which

case the selected MCU's low-level drivers must be downloaded. The example projects

listed in Table 7 include the required drivers. In addition, the S32 Design Studio SDK

library is distributed with a complete IDE and requires no manual driver additions.

The MCUXpresso SDK Builder is a tool that allows the downloading of a customized

MCUXpresso SDK based on a specific evaluation platform or Kinetis MCU. To download

the MCUXpresso SDK, go to: mcuxpresso.nxp.com

6.2.5.3 Downloading the software driver and example projects

To download the latest version of the SIGFOX software driver and the example projects,

do the following:

1. Go to the NXP website www.nxp.com/EMBEDDED-SW-SIGFOX.

2. Download the zip file containing the software driver and the example projects.

3. Unzip the downloaded file and check to see that the folder contains the files listed in

Table 7.

OL2385SWUG bảng dữ liệu(PDF) 29 Page - NXP Semiconductors

OL2385SWUG bảng dữ liệu(HTML) 29 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

bảng dữ liệu tải về

Link URL