SAFC161RI datasheet(33/60 Pages) SIEMENS

33 / 60 page

Semiconductor Group

1998-05-01

C161RI

Absolute Maximum Ratings

Ambient temperature under bias (

A):

SAB-C161RI ...................................................................................................................0 to + 70

°C

SAF-C161RI ..............................................................................................................– 40 to + 85

°C

Storage temperature (

ST)........................................................................................– 65 to + 150 °C

Voltage on

DD pins with respect to ground (VSS) ..................................................... – 0.5 to + 6.5 V

Voltage on any pin with respect to ground (

SS) ................................................. – 0.5 to VDD + 0.5 V

Input current on any pin during overload condition .................................................. – 10 to + 10 mA

Absolute sum of all input currents during overload condition ..............................................|100 mA|

Power dissipation..................................................................................................................... 1.5 W

Note: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent

damage to the device. This is a stress rating only and functional operation of the device at

these or any other conditions above those indicated in the operational sections of this

specification is not implied. Exposure to absolute maximum rating conditions for extended

periods may affect device reliability.

During absolute maximum rating overload conditions (

IN > VDD or VIN < VSS) the voltage on

DD pins with respect to ground (VSS) must not exceed the values defined by the absolute

maximum ratings.

Parameter Interpretation

The parameters listed in the following partly represent the characteristics of the C161RI and partly

its demands on the system. To aid in interpreting the parameters right, when evaluating them for a

design, they are marked in column “Symbol”:

CC (Controller Characteristics):

The logic of the C161RI will provide signals with the respective timing characteristics.

SR (System Requirement):

The external system must provide signals with the respective timing characteristics to the C161RI.

SAFC161RI bảng dữ liệu(PDF) 33 Page - Siemens Semiconductor Group