SSD1850Z datasheet(33/56 Pages) ETC

tên linh kiện	SSD1850Z

Giải thích chi tiết về linh kiện	CMOS LCD Segment / Common Driver with Controller

PDF	56 Pages

Scroll/Zoom	100%

nhà sản xuất	ETC [List of Unclassifed Manufacturers]

Trang chủ

Logo

33 / 56 page

SSD1850/51 Series

Rev 1.2

01/2003

SOLOMON

Set Power Control Register

This command turns on/off the various power circuits associated with the chip.

Set Internal Regulator Resistors Ratio

This command is to enable any one of the eight internal resistor (IRS) settings for different regulator gains

when using internal regulator resistor network (INTRS pin pulled high).

The Contrast Control Voltage Range curves is given in the figure below:

Set Contrast Control Register

This command adjusts the contrast of the LCD panel by changing VL6 of the LCD drive voltage provided

by the On-Chip power circuits. VL6 is set with 64 steps (6-bit) contrast control register. It is a compound

commands:

Set Display Offset

The next command specifies the mapping of display start line (COM0 if display start line register equals to

0) to one of ROW0-79. This command has no effect on ICONS. COM0 is mapped to ROW0 after reset.

Yes

Changes

Complete?

Set Contrast Control Register

Contrast Level Data

SSD1850Z bảng dữ liệu(PDF) 33 Page - List of Unclassifed Manufacturers