|
Features
Input Rating of 24V
Input Overvoltage Protection with 6.5V
Input Voltage Dynamic Power Management
10% Charge Current Accuracy
1% Charge Voltage Accuracy
Pin ISET2 can select 100mA or 500mA
Maximum Input Current Limit
Programmable Termination and Trickle
Threshold
Fixed 10 Hour Safety Timer
Status Indication – Charging/Done
Integrated Auto Start Function for Production
125°C Thermal Regulation
150°C Thermal Shutdown Protection
BAT Short-Circuit Protection
Charge Solutions for JEITA
1. No charge at ‘Temp>55°C’ & ‘Temp<0°C’;
2. 0.5*CC (Constant-Current) Temp at
0~10°C;
3. Constant-Current Temp at 10~45°C;
4. 1.0*CC & BAT voltage = VBAT-0.1 Temp at
45~55°C.
Automatic Termination and Timer Disable
Mode (TTDM) for Absent Battery Pack With
Thermistor
Package: EP-MSOP10
Applications
Low-Power Handheld Devices
Smart Phones
MP3 Players
PDAs
Descriptions
DIO5090C series devices are highly integrated
lithium ion and lithium polymer linear chargers,
suitable for portable applications with limited
space. The device is powered by a USB port or AC
adapter. The high input voltage range with input
overvoltage protection supports low-cost,
unregulated adapters.
DIO5090C has a single power output and can
charge batteries. If the average system load fails
to charge the battery during the 10-hour safety
timer, the system load can be connected in parallel
with the battery.
Battery charging has experienced three stages:
conditioning, constant current and constant
voltage. In all charging stages, IC junction
temperature is monitored by the internal control
loop. When the charging current exceeds the
internal temperature threshold, the internal
control loop will reduce the charging current.
The charger power level and charging current
induction function are fully integrated. The
charger has high precision current and voltage
regulation circuit function, charging status display,
charging termination function. Trickle-charge
current and terminal current threshold can be
programmed by external resistance on DIO5090C.
The value of constant current can also be
programmed by an external resistance.
|