AD7771BCPZ datasheet(59/99 Pages) AD

59 / 99 page

AD7771

Data Sheet

Rev. 0 | Page 58 of 98

Daisy-Chain Mode

Daisy-chaining devices allows numerous devices to use the

same data interface lines by cascading the outputs of multiple

ADCs from separate AD7771 devices. In daisy-chain configura-

tion, only one device has a direct connection between the

DOUTx interface and the digital host. For the AD7771, daisy-

chain capability is implemented by cascading DOUT0 and DOUT1

through a number of devices, or by just using DOUT0 (the

number of DOUTx pins available depends on the selected

DOUTx mode). The ability to daisy-chain devices and the limit

on the number of devices that can be handled by the chain is

dependent on the selected DOUTx mode and the decimation

rate employed.

When operating in daisy-chain mode, it is required that all

AD7771 devices in the chain are correctly synchronized. See

the Digital Reset and Synchronization Pins section for more

information.

This feature is especially useful for reducing the component

count and wiring connections in, for example, isolated

multiconverter applications or for systems with a limited

interfacing capacity.

For daisy-chain operation, there are two different configurations

possible, as described in Table 37.

Using the FORMATx = 10 mode, DOUT2 acts as an input pin, as

shown in Figure 136. In this case, the DOUT0 pin of the AD7771

devices is cascaded to the DOUT2 pin of the next device in the

chain. Data readback is analogous to clocking a shift register

where data is clocked on the rising edge of DCLK.

Table 37. DOUTx Modes in Daisy-Chain Operation

DOUT_FORMAT Bits/

FORMATx Pins

Number of DOUTx Lines Enabled

Associated Channels

DOUT0—Channel 0 to Channel 3 and DOUT2

DOUT1—Channel 4 to Channel 7 and DOUT3

DOUT2—input channel

DOUT3—input channel

DOUT0—Channel 0 to Channel 7 and DOUT2

DOUT2—input channel

U2 S0 CH0 TO CH7

U1 S0 CH0 TO CH7

U2 S0 CH0 TO CH7

U1 S0 CH0 TO CH7

U2 S1 CH0 TO CH7

U1 S1 CH0 TO CH7

U2 S1 CH0 TO CH7

U2 S3 CH0 TO CH7

U2 S0 CH0 TO CH7

U1 S1 CH0 TO CH7

U2 DOUT0

U1 DOUT2/DIN0

U1 DOUT0

U2 DOUT2/DIN0

DRDY

DCLK

DOUT2/DIN0

DOUT0

DOUT2/DIN0

DOUT0

Figure 136. Daisy-Chain Connection Mode, FORMAT0 = 1, FORMAT1 = 0 (S0 Means Sample 0 and S1 Means Sample 1); When Connected in Daisy-Chain Mode,

DOUT2 Acts as an Input Pin, Represented by DIN0

AD7771BCPZ bảng dữ liệu(PDF) 59 Page - Analog Devices

AD7771BCPZ bảng dữ liệu(HTML) 59 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99

bảng dữ liệu tải về

Link URL