ISO8200BQ datasheet(18/37 Pages) STMICROELECTRONICS

tên linh kiện	ISO8200BQ

Giải thích chi tiết về linh kiện	Galvanic isolated octal high-side smart power solid state-relay

PDF	37 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

18 / 37 page

Functional description

ISO8200BQ

18/37

DocID027303 Rev 4

6.2

Direct control mode (DCM)

When SYNC

and LOAD

inputs are driven by the same signal, the device operates in

direct control mode (DCM).

In DCM the SYNC / LOAD

signal operates as an active low input enable:



when the signal is high, the current output configuration is kept regardless the input

values



when the signal is low, each channel input directly drives the respective output

This operation mode can also be set shorting both signals to the digital ground; in this case

the channel outputs are always directly driven by the inputs except when OUT_EN is low

(outputs disabled).

Table 13: Interface signal operation in direct control mode

SYNC / LOAD

OUT_EN

Device behavior

Don’t care

Low (1)

The outputs are disabled (turned off)

High

The outputs are left unchanged

Low

High

The channel inputs drive the outputs

Notes:

(1)The outputs are turned off on OUT_EN falling edge and they are kept disabled as long as it is low.

Figure 9: Direct control mode IC configuration

ISO8200BQ bảng dữ liệu(PDF) 18 Page - STMicroelectronics