ZOPT2202 Datasheet

© 2016 Integrated Device Technology, Inc

41

September 21, 2016

7. Document Revision History

Release Date

Description

September 21, 2016



Added new package type TSV and its package information (see new section 4.2).



Update for part codes.



Addition of note about trimming factors for the UVAB_Raw Mode in Table 3.3.



Addition of Table 3.1 for LGA pin descriptions and Table 3.2 for TVS package.



Updates for Table 3.5 and Table 3.6.



Updates for Figure 3.3 and Figure 3.4.



Update for section 3.10.3



Added new section 4.1.3 for the reflow profile.



Added new section 4.1.4 for tape packaging information.



Minor edits for clarity and formatting.

April 20, 2016

Rebranding for IDT. Revision number is replaced with release date.

January 6, 2016

(Revision 1.00)

First release.

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance

specifications and operating parameters of the described products are determined in an independent state and are not guarante ed to perform the same way when installed in customer products. The

information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but no t limited to, the suitability of IDT's products for any particular purpose,

an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any licens e under intellectual

property rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT p roduct can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a mann er does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of

Integrated Device Technology, Inc. All rights reserved.