UCS1001-3 datasheet(39/57 Pages) MICROCHIP

39 / 57 page

USB Port Power Controller with Charger Emulation

Datasheet

SMSC UCS1001

Revision 1.4 (07-16-13)

DATASHEET

Figure 6.2 shows operation of current limits while using CC mode. Unlike trip mode, once IBUS current

exceeds ILIM, operation continues at a reduced voltage and increased current. Note that the shaded

area representing the USB 2.0 specified VBUS range is now restricted to an upper current limit of

IBUS_R2MIN. Note that the UCS1001 will heat up along each load line as voltage decreases. If the

internal temperature exceeds the TREG or TTSD thresholds, the port power switch will open. Also note

that when the VBUS voltage is brought low enough, the port power switch will open.

6.3

Thermal Management and Voltage Protection

6.3.1

Thermal Management

The UCS1001 utilizes two-stage internal thermal management. The first is named dynamic thermal

management and the second is a fixed thermal shutdown.

Figure 6.2 Constant Current Limiting (Variable Slope) Operation

0.5

1.0

1.5

2.0

2.5

5.25

4.75

0.9

1.2

1.0

0.9

0.5

1.5

IBUS_R2MIN

1.8

2.0

2.5

IBUS (Amps)

ILIM (Amps)

= ILIM’s

Constant

resistance IBUS

operation line 1

(ILIM = 0.5 A)

Constant resistance

IBUS operation line 5

(ILIM = 1.5 A*)

CC Mode - Power switch current increases as

voltage decreases when ILIM is exceeded

following constant resistance lines

*1.5 A limit reduced by -3.5% internally

UCS1001-3 bảng dữ liệu(PDF) 39 Page - Microchip Technology

UCS1001-3 bảng dữ liệu(HTML) 39 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

bảng dữ liệu tải về

Link URL