PI5V331 datasheet(2/5 Pages) PERICOM

2 / 5 page

PS8117

08/07/97

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012

PI5V331

Low ON Resistance Wideband Video

Dual 4-Channel Mux/Demux

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Storage Temperature ........................................................... –65°C to +150°C

Ambient Temperature with Power Applied .......................... –40°C to +85°C

Supply Voltage to Ground Potential (Inputs & Vcc Only) ... –0.5V to +7.0V

Supply Voltage to Ground Potential (Outputs & D/O Only) –0.5V to +7.0V

DC Input Voltage .................................................................. –0.5V to +7.0V

DC Output Current ............................................................................ 120 mA

Power Dissipation ................................................................................... 0.5W

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the de-

vice. This is a stress rating only and functional opera-

tion of the device at these or any other conditions

above those indicated in the operational sections of

this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may

affect reliability.

DC Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 5V ±5%)

Parameters Description

Test Conditions(1)

Min.

Typ(2)

Max.

Units

VANALOG Analog Signal Range

—

2.0

VIH

Input HIGH Voltage

Guaranteed Logic HIGH Level

2.0

—

VIL

Input LOW Voltage

Guaranteed Logic LOW Level

–0.5

—

0.8

IIH

Input HIGH Current

VCC = Max., VIN = VCC

——

±1

µA

IIL

Input LOW Current

VCC = Max., VIN = GND

—

±1

µA

Analog Output Leakage Current

≤≤≤≤≤S1, S2 or D ≤≤≤≤≤VCC, Switch Off

—

±1

µA

VIK

Clamp Diode Voltage

VCC = Min., IIN = –18 mA

—

–0.7

–1.2

IOS

Short Circuit Current(3)

S1, S2, D = 0V VCC

100

—

Input Hysteresis at Control Pins

—

150

—

RON

Switch On Resistance(4)

VCC = Min., VOUT = 0.975V

—

Ω

RL = 75

Ω, ION = 13 mA

VCC = MIN., VOUT = 1.95V

—

Ω

RL = 75

Ω, ION = 26 mA

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at Vcc = 5.0V, TA = 25°C ambient and maximum loading.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. Measured by the voltage drop between S1, S2, and D I/O pins at indicated current through the switch. ON resistance is deter-

mined by the lower of the voltages on the S1, S2, and D I/O pins. VOUT is the voltage across RL.

PI5V331 bảng dữ liệu(PDF) 2 Page - Pericom Semiconductor Corporation

PI5V331 bảng dữ liệu(HTML) 2 Page - Pericom Semiconductor Corporation

Html Pages

1 2 3 4 5

bảng dữ liệu tải về

Link URL