PAM8904Q

Document number: DS38977 Rev. 1 - 2

9 of 11

www.diodes.com

June 2016

© Diodes Incorporated

PAM8904Q

Short-Circuit Protection

The PAM8904Q has short circuit protection circuitry on the outputs to prevent damage. Once a short circuit is detected on the outputs the chip will

limit the total current to protect the output device. This is not a latched fault; once the short is removed the normal operation is restored.

Thermal Protection

If the junction temperature of the PAM904Q exceeds +150°C the device will enter overtemperature shutdown. The outputs and the charge pump

will be switched off. Once the junction temperature cools down to its normal operating condition the IC will re-start automatically.

Ordering Information

PAM8904Q X X X

J: U-QFN3030

E: 16 Pin

R: Tape & Reel

Device

Package

Code

Package Type

(Notes 6 & 7)

7” Tape and Reel

Qualification

(Note 8)

Quantity

Part Number Suffix

PAM8904QJER

J

U-QFN3030-16 (Type B)

3,000/Tape & Reel

R

Automotive Compliant

Notes:

6.

Pad layout shown at http://www.diodes.com/package-outlines.html.

7.

For Tape and reel information see http://www.diodes.com/_files/datasheets/ap02007.pdf.

8.

PAM8904Q has been qualified to AEC-

Q100 grade 2 and is classified as “Automotive Compliant” supporting PPAP documentation. Automotive, AEC-

Q100 and standard products are electrically and thermally the same, except where specified.

For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.

See PAM8904 datasheet for commercial qualified versions.

Marking Information

U-QFN3030-16 (Type B)

(Top View)

Package Type

Pin Configuration

Shipping Package

P8904Q

XXXYW

P8904Q: Product Code

X: Internal Code

Y: Year 0-9

W: Week: A~Z: 1~26 weeks;

a~z: 27~52 weeks;

z represents 52 and 53 weeks