LMH6503 datasheet(4/20 Pages) NSC

4 / 20 page

Electrical Characteristics(Note 2) (Continued)

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

intended to be functional, but specific performance is not guaranteed. For guaranteed specifications, see the Electrical Characteristics tables.

Note 2: Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of

the device such that TJ =TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA.

Note 3: The maximum output current (IOUT) is determined by device power dissipation limitations or value specified, whichever is lower.

Note 4: Human body model: 1.5k

Ω in series with 100pF. Machine model: 0Ω in series with 200pF.

Note 5: Slew Rate is the average of the rising and falling rates.

Note 6: Typical values represent the most likely parametric norm. Bold numbers refer to over temperature limits.

Note 7: Positive current correspondes to current flowing in the device.

Note 8: Drift determined by dividing the change in parameter distribution at temperature extremes by the total temperature change.

Note 9: CMRR definition: [|

∆VOUT/∆VCM|/AV] with 0.1V differential input voltage. ∆VOUT is the change in output voltage with offset shift subtracted out.

Note 10: +PSRR definition: [|

∆VOUT/∆V+|/AV], -PSRR definition: [|∆VOUT/∆V−|/AV] with 0.1V differential input voltage. ∆VOUT is the change in output voltage with

offset shift subtracted out.

Note 11: Gain Control Frequency Response Schematic:

20073932

Note 12: Gain/Phase normalized to low frequency value at each AV.

Note 13: Flat Band Attenuation (Relative To Max Gain) Range Definition: Specified as the attenuation range from maximum which allows gain flatness specified

(either ±0.2dB or ±0.1dB), relative to AVMAX gain. For example, for f<30MHz, here are the Flat Band Attenuation ranges:

±0.2dB:

10V/V down to 1V/V=20dB range

±0.1dB:

10V/V down to 4.7V/V=6.5dB range

Connection Diagram

14-Pin SOIC/TSSOP

20073946

Top View

Ordering Information

Package

Part Number

Package Marking

Transport Media

NSC Drawing

14-pin SOIC

LMH6503MA

55 Units/Rail

M14A

LMH6503MAX

2.5k Units Tape and Reel

14-Pin TSSOP

LMH6503MT

94 Units/Rail

MTC14

LMH6503MTX

2.5k Units Tape and Reel

LMH6503 bảng dữ liệu(PDF) 4 Page - National Semiconductor (TI)

LMH6503 bảng dữ liệu(HTML) 4 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

bảng dữ liệu tải về

Link URL