| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
CAP1203 bảng dữ liệu(PDF) 26 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
CAP1203 bảng dữ liệu(HTML) 26 Page - Microchip Technology |
|
26 / 59 page ![]() DS00001572B-page 26 2013-2015 Microchip Technology Inc. 5.6 Configuration Registers The Configuration registers control general global functionality that affects the entire device. 5.6.1 CONFIGURATION - 20H Bit 7 - TIMEOUT - Enables the timeout and idle functionality of the SMBus protocol. • ‘0’ (default) - The SMBus timeout and idle functionality are disabled. The SMBus interface will not time out if the clock line is held low. Likewise, it will not reset if both the data and clock lines are held high for longer than 200us. • ‘1’ - The SMBus timeout and idle functionality are enabled. The SMBus interface will reset if the clock line is held low for longer than 30ms. Likewise, it will reset if both the data and clock lines are held high for longer than 200us. Bit 5 - DIS_DIG_NOISE - Determines whether the digital noise threshold (see Section 5.19, "Sensor Input Noise Thresh- old Register") is used by the device. Setting this bit disables the feature. • ‘0’ - The digital noise threshold is used. If a delta count value exceeds the noise threshold but does not exceed the touch threshold, the sample is discarded and not used for the automatic recalibration routine. • ‘1’ (default) - The noise threshold is disabled. Any delta count that is less than the touch threshold is used for the automatic recalibration routine. Bit 4 - DIS_ANA_NOISE - Determines whether the analog noise filter is enabled. Setting this bit disables the feature. TABLE 5-8: BASE_SHIFT BIT DECODE BASE_SHIFT[3:0] Data Scaling Factor 32 1 0 00 0 0 1x 00 0 1 2x 00 1 0 4x 00 1 1 8x 01 0 0 16x 01 0 1 32x 01 1 0 64x 0 1 1 1 128x 1 0 0 0 256x All others 256x (default = 1111b) TABLE 5-9: CONFIGURATION REGISTERS Addr R/W Register B7 B6 B5 B4 B3 B2 B1 B0 Default 20h R/W Configuration TIME OUT - DIS_ DIG_ NOISE DIS_ ANA_ NOISE MAX_ DUR_EN - - - 20h 44h R/W Configuration 2 - BC_ OUT_ RECAL BLK_ PWR_ CTRL BC_ OUT_ INT SHOW_ RF_ NOISE DIS_ RF_ NOISE ACAL _FAIL _INT INT_ REL_ n 40h |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |