SN74LVC112ADBLE datasheet(11/24 Pages) TI1

tên linh kiện	SN74LVC112ADBLE

Giải thích chi tiết về linh kiện	SN74LVC112A Dual Negative-Edge-Triggered J-K Flip-Flop With Clear And Preset

PDF	24 Pages

Scroll/Zoom	100%

nhà sản xuất	TI1 [Texas Instruments]

Trang chủ	http://www.ti.com

Logo

11 / 24 page

Frequency (MHz)

0.25

0.5

0.75

1.25

1.5

1.75

2.25

2.5

D003

VCC 1.8 V

VCC 2.5 V

VCC 3.3 V

SN74LVC112A

www.ti.com

SCAS289M – JANUARY 1993 – REVISED DECEMBER 2014

Typical Application (continued)

10.2.3 Application Curves

Figure 6. ICC vs Frequency

11 Power Supply Recommendations

The power supply can be any voltage between the MIN and MAX supply voltage rating located in the

Recommended Operating Conditions table.

Each VCC pin should have a good bypass capacitor to prevent power disturbance. For devices with a single

supply, 0.1

μF is recommended. If there are multiple VCC pins, 0.01 μF or 0.022 μF is recommended for each

power pin. It is acceptable to parallel multiple bypass caps to reject different frequencies of noise. A 0.1

μF and

μF are commonly used in parallel. The bypass capacitor should be installed as close to the power pin as

possible for best results.

Submit Documentation Feedback

Product Folder Links: SN74LVC112A

SN74LVC112ADBLE bảng dữ liệu(PDF) 11 Page - Texas Instruments