PC33889

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability

of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all

liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do

vary in different applications and actual performance may vary over time. All operating parameters, including “Typical” must be validated for each customer application by

customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for

use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any application in which the failure of the

Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized

application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or un authorized use, even if

such claim alleges that Motorola was negligent regarding the design or manufacture of the parts. Motorola and

are registered trademarks of Motorola, Inc. Motorola, Inc. is

an Equal Employment Opportunity/Affirmative Action Employer.

How to reach us:

USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;

JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3-20-1,

P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447

Minami-Azabu, Minato-ku, Tokyo 106-8573 Japan. 81-3-344-3569

Technical Information Center: 1-800-521-6274

ASIA / PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,

2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.

852-26668334

HOME PAGE: http://www.motorola.com/semiconductors

CASE 751F–05

ISSUE F

1

15

14

28

B

S

A

M

0.025

C

SEATING

PLANE

NOTES:

1. DIMENSIONS ARE IN MILLIMETERS.

2. INTERPRET DIMENSIONS AND TOLERANCES

PER ASME Y14.5M, 1994.

3. DIMENSIONS D AND E DO NOT INCLUDE MOLD

PROTRUSIONS.

4. MAXIMUM MOLD PROTRUSION 0.015 PER SIDE.

5. DIMENSION B DOES NOT INCLUDE DAMBAR

PROTRUSION. ALLOWABLE DAMBAR

PROTRUSION SHALL BE 0.13 TOTAL IN EXCESS

OF B DIMENSION AT MAXIMUM MATERIAL

CONDITION.

DIM

MIN

MAX

MILLIMETERS

A

2.35

2.65

A1

0.13

0.29

B

0.35

0.49

C

0.23

0.32

D

17.80

18.05

E

7.40

7.60

e

1.27 BSC

H

10.05

10.55

L

0.41

0.90

q

0

8

__

L

q

C

PIN 1 IDENT

A

B

D

e

0.10

C

CASE OUTLINE

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com